Cleaning aluminium windows

Cleaning aluminium windows

In the use of aluminum doors and windows, the action should be light. If you find it difficult to push and pull, do not pull hard. You should first remove the fault. Ash deposition and deformation are the main reasons for the difficulty in pushing and pulling aluminum alloy doors and windows. It is necessary to keep the door frame clean, especially the push-pull groove. Vacuum cleaner can be used to remove the dust in the groove and the door seal. Check the joint of aluminum door and window frame wall frequently. If the aluminum door and window are loose for a long time, it is easy to deform the whole frame, so that the door and window cannot be closed and sealed. Therefore, the screws at the connection should be tightened immediately. If the screw base is loose, the epoxy strong glue should be used to adjust a small amount of cement for sealing.
1. When cleaning aluminum doors and windows, do not step on the aluminum frame, nor pull the frame for support. This is easy to wear doors and windows or their own accidents.
2. Aluminum doors and windows can be moistened with water or neutral detergent with soft cloth, do not use ordinary soap and washing powder, and do not use detergent, toilet detergent and other strong alkaline cleaners, which will corrode the profile surface.
3. Sealing wool and glass glue are the key structures to ensure the sealing and heat preservation of aluminum doors and windows. If they fall off, they should be repaired and replaced in time.
4. After a rainy day, wipe the wet glass in time
5. After rainy days, wet glass and door and window frames shall be wiped dry in time.
6. The connection parts of the door and window frames shall be checked frequently, the bolts shall be tightened in time, and the damaged parts shall be replaced. The vulnerable parts of aluminum alloy doors and windows, such as shaft pin, wind support, ground spring, etc., shall be inspected from time to time and lubricated regularly to keep them clean and flexible.
7. In the use of aluminum doors and windows, the action should be light, push and pull naturally; if you find it difficult, do not pull hard, push hard, and remove the fault first. Ash deposition and deformation are the main reasons for the difficulty in pushing and pulling aluminum alloy doors and windows. It is necessary to keep the door frame clean, especially the push-pull groove. Vacuum cleaner can be used to remove the dust in the groove and the door seal.
8. Check the joint of aluminum door, window frame and wall frequently,